Bethlehem Metal Roof Coating
Get A Free EstimateCall Us

Metal Roof Coating Services in Bethlehem

Coating Systems for Warehouses, Plants, Offices, and Church Halls

Our metal roof coating services in Bethlehem cover five systems, and each one starts with an inspection of the panels, laps, and drains it will go over.

  • Five Coating Systems
  • Repairs Before Coating
  • One Inspection Visit
Get A Free EstimateCall Us
Drone view of a commercial metal roof in the Lehigh Valley, part coated and part weathered
Plain work truck parked beside a commercial building, seen from above
Five Systems

Metal Roof Coating Services in Bethlehem, Row by Row

These metal roof coating services in Bethlehem each fit a different roof. Read the fit notes, then open the system that matches your building.

Gloved hands cleaning a metal roof panel seam before coating
Main Service

Commercial Metal Roof Coating

Most of our work is steel: through-fastened panels on distribution buildings, shops, and older plant additions. The job covers rust treatment, lap sealing, screw replacement, and a coating sized to the panel profile.

  • Ribbed and corrugated steel panels
  • Rust that has not gone through the metal
  • Screw rows with dried-out washers
  • Gutters and trim coated with the field
Bethlehem commercial metal roof coating →
Top-down view of a low-slope commercial roof with a band of silicone coating going down
Slow-Draining Roofs

Silicone Roof Coating

Choose silicone for roofs near flat, where water lingers after a storm. It cures by moisture in the air and stays flexible through Pennsylvania winters, though it needs silicone for every future recoat.

  • Low-slope metal with long panel runs
  • Older membrane roofs with dry insulation
  • Areas around drains that hold water
Bethlehem silicone roof coating →
Low drone view of acrylic coating lanes rolled along the ribs of a metal roof
Roofs That Shed Water

Acrylic Roof Coating

Pitched panels that drain fast suit acrylic, which rolls or sprays on in layers and recoats easily. The catch is weather: rain or a cold night before it cures can wash or blush the film.

  • Standing-seam and ribbed roofs with pitch
  • Bright white finish for summer heat
  • Simple recoats every several years
Bethlehem acrylic roof coating →
Commercial roof with spray foam about two-thirds applied, seen from a drone
Insulation Plus Waterproofing

Spray Foam Roofing

When a building needs more insulation as well as a dry roof, sprayed polyurethane foam goes over the existing surface and then gets a coating. Dry substrate and calm air are the two conditions we will not bend on.

  • Metal buildings with little insulation
  • Flat roofs with many penetrations
  • Owners who plan to recoat the foam
Bethlehem spray foam roofing →
Commercial building with a coated shingle mansard face, seen from a drone
Asphalt Shingle Faces

Shingle Roof Coating

Commercial shingle roofs sometimes take a coating made for asphalt, mostly on mansard faces and low-pitched church or office roofs. Shingles must lie flat and hold granules; brittle or curled ones need replacing instead.

  • Mansard faces on retail and office blocks
  • Shingles with granules still in place
  • A product approved for asphalt shingles
Bethlehem shingle roof coating →
System Fit

Which System Fits Which Roof

Rows are roofs we see around Bethlehem. Columns are the coating systems. Use it to narrow the list before the inspection confirms it.

  • Usually fits
  • Sometimes
  • Rarely
Your RoofSiliconeAcrylicSpray FoamShingle Coating
Pitched ribbed steel with good runoffSometimesUsually fitsSometimesRarely
Low-slope metal where water lingersUsually fitsRarelySometimesRarely
Older flat roof with dry insulationUsually fitsRarelyUsually fitsRarely
Metal building that needs more insulationRarelyRarelyUsually fitsRarely
Asphalt shingle mansard lying flatRarelySometimesRarelyUsually fits
Choosing A System

Not Sure Which Coating Your Roof Needs?

Start a ballpark estimate or call. The inspection matches the system to your panels, slope, and drains before any price is set.

Get A Free Ballpark Estimate
What To Have Ready
  • Roof type, if you know it
  • Year the roof went on
  • Any coating already on it
  • Spots where water stands
Every System

One Process Behind Every Metal Roof Coating Service in Bethlehem

Whatever the system, the order of work stays the same, and nothing gets coated until the steps before it are done.

Wide drone view of a commercial property while its metal roof is being coated
  1. 1

    Inspect Your Roof

    Panels, laps, fasteners, drains, curbs, and the deck underside get checked and photographed. Core cuts or moisture readings follow where insulation might be wet.

  2. 2

    Pick The System

    Slope, drainage, the existing finish, and future recoats decide between silicone, acrylic, foam, or a shingle product. You see why one fits and another does not.

  3. 3

    Prepare The Surface

    Repairs come first, then washing, rust priming, and lap or seam reinforcement. Adhesion tests show the coating will grip what is already there.

  4. 4

    Apply And Check

    Coats go on at the thickness the product calls for, in weather it allows. Thickness readings and a final walk close out each section.

Get A Free Estimate
Service Questions

Bethlehem Metal Roof Coating Services, Answered

Questions owners ask while comparing coating systems.

Which metal roof coating service fits my building?

The roof decides. Pitched steel that drains well usually gets acrylic or silicone, low-slope roofs that hold water lean toward silicone, and buildings short on insulation look at spray foam. Shingle coating fits only flat, intact asphalt shingles. We confirm the choice after the inspection, once we know what the panels and drains can handle.

Can two systems be used on one building?

Yes, and it happens on older plants. A pitched steel warehouse might take acrylic while a flat office wing behind a parapet takes silicone. The two areas are separated at a clean transition so neither coating has to bond to the other, and each gets its own recoat plan.

Do all five services include repairs?

Every service starts with the repairs the roof needs: loose screws, open laps, cracked boots, damaged trim, and wet insulation. Those repairs are priced on the same proposal as the coating, so you can see how much of the job is preparation and how much is the coating itself.

How long does a coating job shut down part of a building?

Most coating work happens on top of an occupied building with nothing shut down below. Spray foam and some spray coatings need air intakes covered and parking moved for a few hours. We plan those windows with you before work starts, section by section.

What makes one coating price higher than another?

Surface preparation drives the spread more than the coating does. Heavy rust, many penetrations, tall parapets, difficult access, and extra thickness at laps all add labor. Our planning range runs about $2.50 to $4.00 per square foot for coating; the inspection places your roof inside it.

Does a coating change the roof warranty?

It can. Some existing roof warranties have conditions about added coatings, and coating manufacturers set their own requirements for preparation and thickness. Bring any warranty paperwork you have to the inspection so the plan lines up with it before work begins.

Get Started

Book Metal Roof Coating Services in Bethlehem

Tell us the roof type and size, or call, and we will set up the inspection.

Get A Free Ballpark EstimateCall Us
Call Us(610) 984-0876